Rogue SL
2.5L 4-Cylinder · 104,447 mi · Model only
4.1 researched
Research covers this year, model and mileage. Items marked addressed are reported by the owner and not verified by Squeezed. This is not a substitute for a pre-purchase inspection.
2019 Nissan Rogue SL
At 104,447 miles, this front-drive Rogue's main platform risk is the CVT, with documented judder and pressure-control faults that can progress into an expensive transmission repair. The naturally aspirated 2.5L avoids turbo hardware, and the vehicle remains practical for quiet daily transport.
Budget about $7,300 for CVT exposure, check for warm judder, and compare the $11,500 ask with the $12,000 typical private-party value.
Deal Score weighs the asking price against comparable listings, the title, and the repairs documented in this guide.
- Price 14% below market
- Weak reliability (4.1/10)
Red flags
- CVT Judder Risk
The continuously variable transmission is the major documented failure exposure at this mileage
- Front Suspension Wear
Worn control-arm bushings and wheel bearings can affect handling and tire wear
- A/C Compressor Exposure
Compressor failure is a documented Rogue repair as the vehicle ages
Green flags
- Naturally Aspirated Engine
This Rogue uses a naturally aspirated 2.5L 4-cylinder engine rather than a turbocharged engine, so it avoids turbocharger hardware and related boost-system repairs. Its simpler intake arrangement supports routine maintenance access and predictable power delivery.
When this car gets expensive
The chance of a major repair as the miles add up. This one is at 104k, before the climb starts around 151k.
What’s costing this car points
Fixing these, or marking them done, raises the score.
- −0.8
CVT Judder and Failure
Usually shows up around 100k mi - −0.2
Control Arm Bushing Wear
Usually shows up around 100k mi - −0.1
Wheel Bearing Humming
Usually shows up around 105k mi
Detailed findings, 7 items
Open a card for the full breakdown. Items the owner handled show as checked.
Reflects the open findings; items the owner handled are excluded.
Costly repairs. Price them in and use them to negotiate.
CVT Judder and Failure
This Rogue's CVT develops judder because worn pulleys, belt surfaces, and pressure-control components slip under light acceleration, felt as shuddering after the transmission warms up. Continued slipping contaminates the fluid and progresses toward valve-body or complete transmission failure.
Control Arm Bushing Wear
The front lower control-arm bushings crack and soften, producing clunks over bumps, wandering under braking, and uneven front-tire wear. Once the rubber separates from the arm, alignment changes and steering precision deteriorates.
Wheel Bearing Humming
The front wheel bearings develop a growling or humming noise that rises with road speed and changes when the vehicle is gently loaded left or right. Bearing wear eventually creates looseness that affects wheel control and can damage the hub.
Minor wear for the car’s age. Worth tracking, not negotiating.
Engine Mount Vibration
The engine mounts soften and transmit a noticeable shake into the cabin at idle, especially in Drive with the brake applied. Collapsed rubber allows excess engine movement during gear changes and acceleration, increasing stress on nearby exhaust and drivetrain parts.
A/C Compressor Failure
The air conditioning compressor develops bearing noise, clutch failure, or internal seizure, leaving the vents warm and sometimes producing belt noise. Compressor wear contaminates the refrigerant circuit with debris and raises the cost beyond a simple recharge.
Brake Rotor Pulsation
The front brake rotors develop thickness variation that causes steering-wheel or pedal pulsation during moderate-to-heavy braking. Repeated heat cycling and pad transfer create uneven braking surfaces, which worsens vibration and reduces braking smoothness.
Liftgate Latch Actuator Failure
The power liftgate latch actuator sticks or fails to release, leaving the rear hatch unable to open from the exterior or close and lock reliably. Water intrusion and actuator wear interrupt the latch motor and can trigger a hatch-open warning.
Every finding still open carries a question worth asking. Copy them as one message, already ordered by severity. Anything you have marked above drops off on its own.
Price & negotiation
BetaBased on comparable listings and the repairs you can document. A starting point for what this car should cost.
Price breakdown
What it costs, and when
Verify now
Critical and major items to confirm first.
Possible year-one expense
Caution items with repair-cost context.
Each range is what that one item costs if it turns out to be present. Not every item will apply to this car, so they do not add up to a bill. Verify with a mechanic.
Asking is $11,500 against a typical $13,450 for this car and mileage. The work is the difference, not the sticker.
Negotiate your offer
Asking is about 14% below the market estimate, so there may be less room to move. The documented repairs below are still relevant to raise.
- Documented critical/major repairs of $4,700–$9,850 you can point to.
- Strongest items to raise first: CVT Judder and Failure, Control Arm Bushing Wear.
Pricing is in beta. The market estimate comes from research models and can be off by thousands on the same car, so check recent local listings before you rely on it. This is information to help you research, not a professional inspection, an appraisal, or financial advice.
Recalls & safety
NHTSA crash-test ratings and recall data for this make, model, and year. Check recall status with your VIN before buying.
In-person inspection
7 things to check before you buy
3 major and 4 caution findings, turned into a walkthrough for the driveway. Answers save as you go.
Before you leave: Ask the seller not to start or move the car before you arrive. A sales-ready car has usually been warmed up, and a warm engine hides the startup smoke, rattles and rough idle that the first section is built around.
01Exterior Walk-around1
Look at the ground under the car before anything else, and separate fresh wet marks from old stains. Then walk the body in daylight: panel gaps and paint texture for past repairs, glass, lights, tire age, and the wheel arches and rockers for rust or filler. Push each corner down; it should rebound once and settle.
02Underneath1
Get low with the flashlight while everything is still cool. Look for drips and oily residue, feel inside the tailpipe for black greasy soot, and check the rubber CV boots at the ends of the axles for splits throwing grease. Kinks in the frame rails, fresh weld marks, and new undercoating on an old car all point at repaired collision damage.
03Engine & Systems2
Before the first start: pull the oil dipstick and look for a milky film, check the coolant for oil or rust, squeeze the radiator hoses for hard or mushy spots, and note the battery date. Once warm: confirm the cooling fans cycle, listen for belt noise, look for fresh seepage that was not there cold, and check that the A/C blows cold.
04Test Drive3
Drive a route with stops, a hill, and some open road. Feel for shift quality, clutch or torque-converter behaviour, brakes that pull or pulse, steering play, and any noise that changes with speed or steering angle.
Plus 3 wear and baseline checks, added because this car’s findings are short.
Everything on this list is what you can see standing next to the car. A shop on a lift sees the rest, and a written pre-purchase inspection listing parts and labor is what a seller has to answer to. Budget roughly $100 to $150 at an ASE-certified shop.
Get your own Buyer Guide
Same depth of analysis, personalized to the exact vehicle you're evaluating. Known failure patterns, repair cost exposure, and questions to ask the seller.
