2017 Ford Explorer XLT
This Explorer's expensive risks sit in the engine and the all-wheel-drive unit, not the body or the cabin. The water pump lives inside the V6, so a worn seal puts coolant in the oil with no puddle to warn you. Its Ohio winters make the rear toe links the first thing to check underneath. Run the VIN for open recalls, pull the dipstick cold, and smell for burnt gear oil behind the engine after the drive.
Deal Score weighs the asking price against comparable listings, the title, and the repairs documented in this guide.
- Price 5% above market
- Weak reliability (4.2/10)
At a glance
Out of 100 against a typical car its age.
Tap an area for why.
Red flags
- Four Ohio Winters
Road salt is what rusts the rear suspension and the brake lines on this truck
- Towed a Camper
Towing heats every fluid in the driveline, and none of them are on a schedule here
Green flags
- New Tires
The seller fitted new Michelins last spring, so the first big wear item is already covered
- Moved South in 2021
Five years in Texas means the underbody has stopped collecting salt
When this car gets expensive
The chance of a major repair as the miles add up. This one is at 112k, right where the climb starts.
What’s costing this car points
Fixing these, or marking them done, raises the score.
- −1.1
Internal Water Pump Failure
Usually shows up around 100k mi - −0.5
PTU Overheating and Seal Leaks
Usually shows up around 90k mi - −0.2
Rear Toe Link Fracture
Cross-referenced 10 citations across 6 findings, including 2 manufacturer records (recalls and service bulletins) and 3 owner-report sources.
Detailed findings, 6 items and 4 wear checks
Open a card for the full breakdown. Items the owner handled show as checked.
Reflects the open findings; items the owner handled are excluded.
Check these before you buy. A clean check clears the car.
Internal Water Pump Failure
The 3.5L V6 in this Explorer has its water pump inside the engine, driven by the timing chain. When the pump's seal wears, coolant leaks into the oil instead of dripping onto the driveway, so there is often no puddle and no warning until the oil is contaminated.
Rear Toe Link Fracture
The rear suspension toe links on 2011 to 2017 Explorers can rust and snap, mostly on trucks that spent winters in road-salt states. Ford recalled them in several waves and fits a revised link. This one spent four years in Ohio before moving to Texas.
Costly repairs. Price them in and use them to negotiate.
PTU Overheating and Seal Leaks
The power transfer unit sends drive to the rear wheels. It holds very little gear oil and sits right beside the exhaust, so the fluid cooks, the seals leak and the gears wear. Ford never set a change interval for it, so most have never had the fluid changed. Towing a camper adds heat.
Minor wear for the car’s age. Worth tracking, not negotiating.
Exhaust Odor in the Cabin
Many 2011 to 2017 Explorers let exhaust smell into the cabin, worst under hard acceleration with the climate on recirculate. NHTSA investigated 1.3 million of them and closed without a recall. It found dangerous carbon monoxide only where rear crash repairs or added holes were left unsealed. Ford's bulletin reseals the rear body seams and updates the climate control.
Rear A/C Evaporator Leak
Explorers with rear climate control have a second evaporator in the rear quarter panel. Owners report it leaking refrigerant, so the rear vents blow warm and the system needs recharging every season.
Front Lower Control Arm Bushings
The rear bushings of the front lower control arms on this platform crack with age and mileage, more so on a truck that has towed. Most shops replace the whole arm.
What's working well
One Owner With Dealer Records
The seller says it is a one-owner truck with dealer service records. That makes the water pump, PTU fluid and recall history checkable on paper before you drive anywhere.
On this truck the records answer the three questions that matter most.
Wear and tear
4 itemsNormal wear at this age and mileage, not faults of this model, so they don't count toward the score. 4 are due at this mileage.
Shocks and Struts
Wheel Bearings
Brake Pads and Rotors
Transmission Fluid
Every finding still open carries a question worth asking. Copy them as one message, already ordered by severity. Anything you have marked above drops off on its own.
Price & negotiation
BetaBased on comparable listings and the repairs you can document. A starting point for what this car should cost.
Price breakdown
What it costs, and when
Verify now
Critical and major items to confirm first.
Possible year-one expense
Caution items with repair-cost context.
Watch later
Lower-confidence or no-cost items to monitor.
Each range is what that one item costs if it turns out to be present. Not every item will apply to this car, so they do not add up to a bill. Verify with a mechanic.
Asking is $13,900 against a typical $13,200 for this car and mileage. The work is the difference, not the sticker.
Negotiate your offer
At asking, this is about 5% above the market estimate (about $700). The documented repairs below are the kind of evidence buyers cite to start lower.
- Documented critical/major repairs of $3,700–$7,900 you can point to.
- Strongest items to raise first: Internal Water Pump Failure, PTU Overheating and Seal Leaks.
Pricing is in beta. The market estimate comes from research models and can be off by thousands on the same car, so check recent local listings before you rely on it. This is information to help you research, not a professional inspection, an appraisal, or financial advice.
Recalls & safety
NHTSA crash-test ratings and recall data for this make, model, and year. Check recall status with your VIN before buying.
In-person inspection
6 things to check before you buy
1 major and 3 caution findings, turned into a walkthrough for the driveway. Try it on this sample.
Before you leave: Ask the seller not to start or move the car before you arrive. A sales-ready car has usually been warmed up, and a warm engine hides the startup smoke, rattles and rough idle that the first section is built around.
01Cold Start CheckFirst1
Start the engine cold while you watch the exhaust and listen. Note how quickly it catches, the tint of any smoke, rattles in the first few seconds, and how smoothly it settles into idle. This is the one test you cannot repeat on the spot.
02Underneath2
Get low with the flashlight while everything is still cool. Look for drips and oily residue, feel inside the tailpipe for black greasy soot, and check the rubber CV boots at the ends of the axles for splits throwing grease. Kinks in the frame rails, fresh weld marks, and new undercoating on an old car all point at repaired collision damage.
03Interior & Electronics1
Turn the key to accessory and then on, before starting. Confirm every warning light comes on and then clears, and test the windows, locks, climate fan, infotainment, and seats while the engine is off. Smell for damp, lift the mats to feel for wet carpet, and compare pedal rubber wear against the odometer.
04Test Drive2
Drive a route with stops, a hill, and some open road. Feel for shift quality, clutch or torque-converter behaviour, brakes that pull or pulse, steering play, and any noise that changes with speed or steering angle.
Plus 4 wear and baseline checks, added because this car’s findings are short.
Everything on this list is what you can see standing next to the car. A shop on a lift sees the rest, and a written pre-purchase inspection listing parts and labor is what a seller has to answer to. Budget roughly $100 to $150 at an ASE-certified shop.