2020 Ford Fusion
Common problems & what to know before you buy
Before you message the seller, know the documented failure patterns, repair cost exposure, and risk level for the 2020 Ford Fusion.
What to watch for on the 2020 Ford Fusion
Coolant Intrusion into the Cylinders
Some engines from the mid-2010s leak coolant into the cylinders through a cracked block or head gasket area.
Coolant Intrusion and Overheating (Recall)
The 1.5L four-cylinder can lose coolant into the cylinders, and Ford recalled 2017 to 2019 Escape and 2017 to 2018 Fusion models with this engine over overheating that can crack the cylinder head.
1 more known problem on the 2020 Fusion
Your guide shows all of them and which apply to the exact car, and what to ask the seller.
Recalls on the 2020 Ford Fusion
Electrical system: management system/energy control module (bms/becm)
The battery energy control module (BECM) may become damaged due to excessive voltage and current flow.
Back over prevention: software
A software error may cause the rearview camera to display a blank image, or the image may remain on the display after the backing event has…
Equipment: engine block heater
The engine block heater may crack and develop a coolant leak, causing it to short circuit when the block heater is plugged in.
Source: NHTSA
What 184 owners reported
Source: NHTSA
2020 Ford Fusion at a glance
- Trims
- PlatinumSS HybridSESE HybridTitaniumTitanium Hybrid
- Engine
- 2.0L 4-Cylinder Turbo, 2.5L 4-Cylinder, 2.0L 4-Cylinder Hybrid, 1.5L 4-Cylinder Turbo
- Transmission
- Automatic 6-spd, CVT
- Drivetrain
- AWD, FWD
- Fuel
- Gasoline, Hybrid
- Body style
- Sedan
Other Ford Fusion years
Free Car Finder
Still deciding on the 2020 Ford Fusion?
Answer a few quick questions and see your top 3 used cars, with the years to shop.
Frequently asked questions
What are the common problems with the 2020 Ford Fusion?
Owners have filed 184 complaints about the 2020 Ford Fusion with NHTSA, most often about the power train. There are 3 recall campaigns covering this model year. Known problems on its engines include coolant intrusion into the cylinders, coolant intrusion and overheating and carbon buildup on intake valves. Squeezed's free research-backed buyer guide cross-references these against documented failure patterns and mileage-stage risks, sorted by severity, in about a minute.
Is the 2020 Ford Fusion reliable?
Reliability depends heavily on the specific configuration and how the car was maintained. Start with the 3 open recall campaigns on this model year and confirm the work was completed. Generate a Squeezed buyer guide for this exact vehicle to see a reliability snapshot, repair-cost exposure, and the questions to ask the seller before you buy.
Should I still get a pre-purchase inspection on a 2020 Ford Fusion?
Always. A Squeezed buyer guide is the triage step before the inspection: it shows you the documented failure patterns and what to check so you can decide which 2020 Ford Fusion listings are even worth a mechanic's time, then walk into the PPI knowing exactly what to look for.
Squeezed is a buyer guide based on public data and industry patterns, not a mechanical inspection. Always get a professional pre-purchase inspection before you buy.